<h3 id="h_01JNW6AVGY7WWMTPFF55A1HP9R">Estimated installation Time: 15 mins</h3>
<ol>
<li>
Twist on the included antenna securely. <img alt="IMG_7209.jpg" src="https://hsfiles.gorgias.help/gm/help-centers/104502/attachment/6054060f-453c-45eb-9ae2-5601c0206a05.jpg"> 
</li>
<li>
Choose an ideal location, ensuring the power cord and irrigation wires can reach the controller. Mark the top with a pencil. <img alt="IMG_7216.jpg" src="https://hsfiles.gorgias.help/gm/help-centers/104502/attachment/809173a4-7a94-4876-b2a7-3d0cbab4eac0.jpg"> 
</li>
<li>
Use a 3/16-inch bit to drill the included screw through the drywall 3/8&#x201D; below the mark, leaving 1/4&#x201D; out for hanging. <img alt="IMG_7220.jpg" src="https://hsfiles.gorgias.help/gm/help-centers/104502/attachment/d3f18ec0-74e8-43e8-919f-8c9b1f04ebc1.jpg"> 
</li>
<li>
Hang the controller on the screw, ensure it&#x2019;s level, and mark the spot for the second anchor with a pencil. <img alt="IMG_7225.jpg" src="https://hsfiles.gorgias.help/gm/help-centers/104502/attachment/c90a590c-8abf-4b24-9e95-d08fac4e40d5.jpg"> 
</li>
<li>
Drill a hole for the second anchor and use a Phillips screwdriver to tighten the screw. <img alt="IMG_7227.jpg" src="https://hsfiles.gorgias.help/gm/help-centers/104502/attachment/ba445a43-648f-41f9-a258-e9fd3183e0fb.jpg"> 
</li>
<li>
Connect Sprinkler Wires <img alt="wire_connection.gif" src="https://hsfiles.gorgias.help/gm/help-centers/104502/attachment/abea155f-d697-4308-8bfa-c3af4ccf2a42.gif"> 
</li>
<li>
Connect Power <img alt="IMG_7229.jpg" src="https://hsfiles.gorgias.help/gm/help-centers/104502/attachment/07ac1e25-d9fb-4664-a648-5c9ae3763768.jpg"> 
</li>
<li>
Plug in the power; all 4 LEDs will turn on. <img alt="IMG_7230.jpg" src="https://hsfiles.gorgias.help/gm/help-centers/104502/attachment/75970049-feaf-49e8-bcee-be30c10361c5.jpg"> 
</li>
<li>
Press and hold the reset button for 3 seconds or until the 3rd and 4th LEDs start flashing. <img alt="IMG_7236.jpg" src="https://hsfiles.gorgias.help/gm/help-centers/104502/attachment/3555b17b-bc29-4d77-bd78-01fd33ec3f7e.jpg"> 
</li>
<li>Scan QR code to pair <img alt="scan_qr_code.gif" src="https://hsfiles.gorgias.help/gm/help-centers/104502/attachment/905ea3d0-6dec-4aab-bb05-256be6628f37.gif"></li>
</ol>

Soildrops Controller Installation Tutorial

The sensor can transmit up to 100 feet without major obstacles, and 60–80 feet when transmitting through a house. A booster can extend the range to over 300 feet. For best performance, place the booster within 50 feet of the sensor. Boosters can be p

<h4 id="h_01JNW6AVGY7WWMTPFF55A1HP9R">Estimated installation Time: 3 mins each sensor</h4>
&#xA0;
The sensor can transmit up to 100 feet without major obstacles, and 60&#x2013;80 feet when transmitting through a house. A booster can extend the range to over 300 feet. For best performance, place the booster within 50 feet of the sensor. Boosters can be purchased at Soildrops.com.
&#xA0;
Step 1: Place Your Sensor
Sprinkler Zones: Place in the center of the zone.
Dripline Zones: Place under a drip hole at the midpoint for accurate readings.
&#xA0;
Pro Tips:
<ul>
<li>
Place near the controller for the strongest signal.
</li>
<li>
Avoid having concrete or metal doors between the controller and sensor.
</li>
<li>
Do not place the sensor next to footings, concrete, rocks, or bricks.
</li>
<li>
Position the sensor at the highest point in the area whenever possible.
</li>
</ul>
<img alt="SetUp1-1.png" src="https://hsfiles.gorgias.help/gm/help-centers/104502/attachment/a7de5118-caa3-40af-ab6f-b1e02ad43f55.png">
Step 2: Moisten Soil
<ol>
<li>Avoid damage by inserting into moist soil.</li>
<li>Water the area manually or, use QuickRun (3-5 min) in the app.</li>
</ol>
<img alt="Screenshot 2025-03-08 at 4.55.38&#x202F;PM.png" src="https://hsfiles.gorgias.help/gm/help-centers/104502/attachment/e45f203d-6fe0-4223-afe0-09f6c6410d57.png">
Step 3: Pair Your Sensor
<ol>
<li>Near controller, hold button (5s) until LED blinks.</li>
<li>In the app, tap &apos;Add Sensor&apos; and scan the QR code.</li>
<li>Wait for pairing confirmation.</li>
</ol>
<img alt="sensor_pairing.gif" src="https://hsfiles.gorgias.help/gm/help-centers/104502/attachment/820cbe51-39cd-40e1-82b3-1cad1a450c8b.gif">
Step 4: Sensor Insertion
<ol>
<li>Gently push sensor into soil. Stop and move if you feel resistance.</li>
<li>Push sensor down until top is flush with soil.&#xA0;</li>
</ol>
<img alt="sensor_insertion.gif" src="https://hsfiles.gorgias.help/gm/help-centers/104502/attachment/cae859b0-88ed-4ecc-9cca-3be7c4dfc017.gif">
Step 5: Wait for Data
<ol>
<li>Initial 0% moisture is normal &#x2013; don&apos;t worry! You&#x2019;ll recieve an accurate reading within 10 minutes.Congratulations, your sensor is now monitoring soil moisture.</li>
<li class="p1">If no data appears after 10 minutes, try moving the sensor to a different spot for a better signal.</li>
</ol>

Installation Guidance

Soildrops Controller Installation Tutorial

Soildrops Soil Moisture Sensor Installation Tutorial